If you're at all familiar with Lean manufacturing, then you've probably heard of 7 Wastes of Lean. Originally recognized by Toyota Production System pioneer Taiichi Ohno, the original 7 wastes were identified as the most common wastes manufacturers face: defects, overproduction, waiting, transportation, inventory, motion, and extra processing. These things, Ohno identified, were the enemy to productive manufacturing, and Lean methodologies strive to purge these wastes from production processes. The 8 Wastes of Lean is an extension of Ohno's philosophy.
The 8th waste, non-utilized talent (sometimes called skills), is a much-needed update to the list of things that stand in the way of a company's success. Updating the common wastes of Lean with non-utilized talent is a no-brainer, since this problem is a common one, no matter what industry you're in. Often times, new hires get placed on the job without the proper training because there's only time to give them the ten-minute rundown of their duties. While this may seem like a way to save time in the moment, the long-term ramifications of these can cost far more in terms of waste.
Below is a brief description of the 8 Wastes, and ways to combat these issues in your facility. A good way to remember these wastes is through the acronym DOWNTIME.
- Defects - products or services that don't meet company standards
- Overproduction - producing more of a product than customer demand requires
- Waiting - the down time between steps in a production process
- Non-utilized talent - not taken full use of employees
- Transportation - unnecessary movement of materials in production processes
- Inventory - making/storing more than meets customer demand
- Motion - people or equipment moving more than necessary
- Excessive processing - steps that don't add value for customer but cost resources
Defects are characterized as any products that don't meet company standards. Defects are usually considered the worst of the wastes, since they often require reworking to become sellable or they get scrapped entirely. Scrapping and reworking entails additional costs to the operation without adding any value for the customer.
Let's look at some examples. In manufacturing, this might look like a 100 Fuzzie Wuzzie bears needing rework because they were produced without right eyes. Defect-related waste could also look like a real estate company needing to reprint 5,000 brochures because the CEO's last name was spelled incorrectly. Defects can manifest themselves in different ways, but the reason they occur often stems from the fact that there was a failure to implement steps to catch and correct human error.
How to combat defects:
- Implement Six Sigma to detect abnormalities
- Rethink production process - can it be done in a way that avoids the risk of this defect?
- Standardize work to ensure manufacturing is consistently free of defects
One of the subtler of the wastes, overproduction, happens when a product (or piece of a product) is made before customer demand requires it. While it might be tempting to produce as many products as possible, this tactic, the "Just in Case" way, causes a host of problems. This strategy can prevent smooth workflow, drive up storage costs, hide defects in the inventory, requires too much money to fund production process, and has excessive lead-time.
Rather than a "Just in Case" strategy, Lean methodologies believe businesses are better off subscribing to the "Just In Time" concept of production. This production philosophy focuses on customer demand instead of producing as much product as possible, and allows your company to operate more efficiently.
Other ways to combat this type of waste:
- Takt Time ensures the rate of manufacturing between stations is even
- Reduced setup times allows for producing small batches
- Use a pull or Kanban system to manage amount of WIP.
Waiting is perhaps the easiest of manufacturing wastes to overlook. Essentially, this waste occurs when time is lost as a result of a sag in productivity. Examples include: workers waiting on material, production stopped for equipment cool downs or maintenance, and too many reviews required before process continues.
Waiting time is often precipitated by unevenness in production and can result in excess inventory or overproduction. In an office setting, a good example of waste is unnecessary or excessive meetings, long email chains, long queue of files waiting to be approved, etc.
The best way to combat waiting waste is implementing continuous flow or single piece flow into your business production processes.
This is new addition to the 8 Wastes. Though not acknowledged by the Toyota Production System, this 8th waste refers to the waste of human talent. This waste occurs when companies have management that doesn't utilize employees expertise, experience, and skill. Instead of inviting employees to use their knowledge to help improve processes, they're only expected to follow orders. The consequence of this is often inefficient, stale manufacturing processes and a workforce that doesn't feel comfortable offering suggestions.
Another way this waste rears its head is when workers aren't sufficiently trained. For companies to operate efficiently and productively, they must fully invest in their workers, and complete training is a great place to start.
When workers are given the opportunity to thrive in the workplace, they work their hardest and best.
Of all the different types of waste, transportation waste can be the trickiest to spot. This waste refers to the unnecessary movement of products, equipment, and people. Not only does too much transport take away precious time from the production process, it also makes materials/products more susceptible to damage and defects. Another pitfall of this waste is it makes for unnecessary work, adds wear and tear to equipment, and can lead to premature fatigue.
Combating transportation waste:
- Take a Gemba walk, paying especially close attention to the steps involved in production
- Redesign processes, focusing on ways to minimize movement and streamline manufacturing
Too much inventory is waste. This is a controversial opinion. Depending on who you ask, you'll either get shouted down are receive uproarious applause in agreement. Accounting departments don't consider excessive inventory to be a waste because they look at inventory as assets. In production, however, excessive inventory leads to defected or damaged products, defects being hidden in the inventory, longer lead time in production process, and inefficient use of capital. Too much inventory is usually a result of over-purchasing or overproducing (which is another kind of waste). While some people still maintain that excess inventory isn't a waste, this issue can result in a lot of extra costs, especially if a defect is discovered in the large inventory.
In terms of Lean manufacturing, motion refers to any unnecessary movement of equipment, people, or machinery. Walking, lifting, reaching, bending, stretching, and moving that adds time or expends extra energy would qualify as motion waste.
Let's look at a few examples:
A dentist office keeps its records in a cabinet so high its receptionist needs to use a ladder to access files. This extra movement each time a patient needs to be checks in adds time, expends too much energy, and increases the risk of an accident.
In a warehouse setting, this might look like crew members having to strain to reach where tools are kept, or having to walk 100 feet to retrieve a commonly-used piece of equipment.
Combating motion waste:
- Make organization a priority
- Implement a 5S program
- Reassess where tools are kept
Extra processing refers to a product or service having more features or capabilities than is required or expected by the customer. In manufacturing, this could include using equipment with more components or capacities beyond what is required to manufacture product, over-engineering a solution, spending too much time on unnecessary analysis or adjustment, and having more functionalities to a product than needed.
Extra processing could also look like documents needing too many reviews for approval, redundant data entry, or anything that adds extra steps in a workflow.
Combating extra processing:
- Better understanding of your customer's product expectations
- Have customer expectations in mind before designing production processes
- Produce to the quality level customer desires/needs
- Kaizen and Lean Manufacturing
- What is Lean Logistics?
- 5 Lean Principles for Process Improvement
- Lean Manufacturing [Techniques, Solutions & Free Guide]
- Toyota Production System (TPS & Lean Manufacturing)
- Kaizen (Lean Continuous Improvement)
- Lean Healthcare (Principles for Improvement)
- Understanding the Principles of Lean Construction
- House of Lean