3452 results for 'left'

Categories
    How should an overhead crane be left when not in use?(Page)

    Overhead cranes are used regularly in a variety of different types of facilities. Crane operators should know how to use these cranes safely and effectively to avoid any type of problem. They also...

    How are NFPA labels and diagrams formatted?(Page)

    The NFPA diamond is one of the most famous and well-recognized safety symbols in the world. Even most people who don’t work with this type of thing have at least seen it on the back of trucks and in...

    What is the IIAR?(Page)

    The IIAR is an acronym for the International Institute of Ammonia Refrigeration. The institute oversees the standards on labeling industrial refrigeration equipment for all those who interact with...

    Ammonia Pipe Marking Standards | IIAR Requirements(Page)

      Pipe Marking Ammonia Pipe Marking OSHA Regulations & Compliance

    IIAR(Page)

      Pipe Marking

    Making Barcodes with LabelSuite(Page)

    Creating barcoding systems for your inventory has never been simpler, thanks to the intuitive, easy-to-use LabelSuite™ software that comes free with all LabelTac® industrial printers. Follow the...

    What Does a Hazard Diamond Sign Mean?(Page)

    Hazard diamonds, also known as hazard warning signs or diamond-shaped placards, are used to communicate the potential hazards of chemicals, materials, or equipment. These signs are typically found in...

    Can Exposed Wires Cause a Fire?(Page)

    When you’re running a busy office or manufacturing factory, one of the hazards you have to be aware of is the potential of fire caused by faulty electrical wiring. Exposed electrical cables are...

    ASME Standards for Marking Abandoned Pipes(Page)

      Pipe Marking ANSI Regulations & Compliance Facility Marking

    How Often are Healthcare Facilities Required to Practice Their Emergency Preparedness Plan?(Page)

    In most workplaces employees can expect to have to go through a fire drill, shelter in place drill, and even an active shooter drill at least a couple times a year. In a healthcare facility, however,...

    How is the Variable Manufacturing Overhead Efficiency Variance Calculated?(Page)

    In just about every industry, one of the largest expenses is going to be from the hours that employees are working and the amount of time a machine is dedicated to a product. Calculating how many...

    Do employees need to be trained about emergency egress?(Page)

    Yes, employees must be adequately trained about emergency egress procedures in the workplace to ensure their safety and the effective evacuation of the premises in case of emergencies. Emergency...

    What signs are needed for overhead cranes?(Page)

    Overhead cranes are essential for construction, shipping, and many other industries. Whenever using this (or any) type of crane, it is critical that the proper safety precautions are followed. One of...

    What is a Pareto chart?(Page)

    A Pareto chart is a popular way to display information that uses both bars and lines. In these charts, the individual numbers on the graph are represented by the bars, and then the cumulative totals...

    What is an EOT crane?(Page)

    Electric Overhead Traveling Crane, or EOT crane for short, is a popular type of crane used in a variety of different environments. They are a type of overhead crane, and can also be called a bridge...

    What is a crane operator?(Page)

    Crane operators are responsible for a number of different activities in their day-to-day job. Anyone who is thinking about pursuing this as a career will want to learn as much as they can about what...

    What are crane safety inspections?(Page)

    Crane inspections need to be done on a regular basis in order to minimize the risk of something breaking, which could cause a disaster. OSHA requires that cranes be inspected monthly and annually to...

    What is headroom in an EOT?(Page)

    Electric Overhead Traveling (EOT) cranes are one of the most common types of cranes used in factories and other locations today. They are a very efficient and relatively easy to use crane, and will...

    Fire Diamond(Page)

      Hazcom

    What is the GHS format?(Page)

    The Globally Harmonized System (GHS) of Classification and Labeling of Chemicals is a globally recognized standard for identifying various hazardous chemicals. It is used whenever storing,...

    What is the NFPA diamond?(Page)

    Most people have seen the NFPA diamond, even if they didn’t know that this is what it was called. The NFPA diamond is commonly seen on the backs of semi-trucks that are transporting potentially...

    What are crane hand signals?(Page)

    There are many times when a crane operator will be in a position where they can’t easily see the load that they will be working with. In this case, they will have a qualified signal person standing...

    What do the colors represent on the NFPA diamond?(Page)

    The NFPA diamond is one of the most iconic safety symbols in many different industries. Anywhere that works with potentially dangerous chemicals or materials will have seen this diamond. Even those...

    What are the dangers of ammonia exposure?(Page)

    If someone is exposed to the manufactured form of concentrated ammonia, they may suffer from severe chemical burns that in some cases permanently damage/disfigure the skin and respiratory tract...

    What are the requirements for tower crane inspections?(Page)

    Tower cranes are a common type of machine that are used to lift and move heavy objects from one place to another. They are often found at the top of large buildings during construction so that the...

    What are the procedures for performing maintenance on a crane?(Page)

    Keeping a crane in good working order is critical for any industry that is using these pieces of heavy machinery. Cranes can cost millions of dollars, so it makes sense to maintain them properly so...

    How are fishbone diagrams created?(Page)

    Fishbone diagrams, which are also known as Ishikawa diagrams, were originally created by Kaoru Ishikawa. They are used to show the causes of specific events. While there are quite a few ways that...

    What should my first step in tool organization be?(Page)

    Taking a cue from 5S, the first step of tool reorganization should be to sort. Sorting will help to get rid of common problems almost immediately including getting rid of tools and materials impeding...

    What is an overhead crane?(Page)

    An overhead crane, which is sometimes known as a hoist overhead crane or a hoist bridge crane, is a type of crane that operates in one location for long periods of times. They are typically used in...

    What administrative controls improve crane safety?(Page)

    Crane safety is an important subject that deserves the attention of not only crane operators, but also those who work in the surrounding area. Implementing administrative controls related to the...

    What is in a biohazard spill kit?(Page)

    Biological hazards present a unique set of risks because they pose a threat to the health of a living organism, most often humans. Because there is a risk of potentially infectious materials...

    How do I create a value stream map?(Page)

    Value stream maps represent the flow of materials, work, ad information through the facility and are a Lean tool used to identify areas of improvement. While creating a value stream map can be simply...

    What are the most common crane safety hazards?(Page)

    Cranes are an essential machine for many industries. Due to the fact that it is so large, and it moves such heavy objects, it can also be very dangerous. Learning about the various hazards associated...

    How does transportation labeling facilitate the tracking and tracing of goods during transit?(Page)

    One crucial aspect of transportation labels is providing handlers with tracking capabilities  during transit, creating a smoother journey and allowing senders to monitor their shipments...

    What text should I use on a pipe label?(Page)

    Pipe labels are quite a bit different than most other types of labels in the workplace. This is partly because of the fact that there is a very limited amount of visible room on this particular type...

    Are crane operators required to be trained and certified?(Page)

    Crane operators are an important position in many different industries. They are used in construction, warehousing, shipping, manufacturing, shop floors, and many other situations. This is why there...

    What are the advantages of a QR code over a barcode?(Page)

    While normal 1D barcodes may be the standard and easy “go to” option for a majority of companies that need to gather information about a product efficiently and effectively, 2D barcodes such as QR...

    RACI Chart(Page)

      Six Sigma

    What should I avoid in a safety sign?(Page)

    Safety signs and labels are only effective I they can be easily understood by an employee. The following are best practices to avoid common mistakes when posting safety signs in the workplace:Place...

    Fishbone Diagram(Page)

      Kaizen